|
Current Granite Selection:
To view our range of colours and select the one you want from our gallery please click on the tile opposite.
Price: £ m2
|
 |
Worktop Measurements
Please measure the length and width of each worktop piece that you require and enter them into the boxes below. Include any other units such as breakfast bars, island units etc. Price is based on 30mm thickness granite. Please ensure your measurements are in mm (1m = 1000mm).
Based on a 600mm depth the longest run we can guarantee without a joint is 2800mm for granite and 3000mm for quartz stone. These measurements may be reduced if there is a cut-out in the run.
Piece 1 = mm x mm
Piece 2 = mm x mm
Piece 3 = mm x mm
Piece 4 = mm x mm
Piece 5 = mm x mm
Piece 6 = mm x mm
Piece 7 = mm x mm
Piece 8 = mm x mm
Total Area = 0 m2
Cost = £0
|
 |
15 Year Warranty, Dry Treat
Was £100 Now 80% discount
Cost = £20
Apply to Total
|
 |
Polished Edges
These are the edges of the worktop that are visible and would need polishing. Price is based on straight edge polish with chamfer (other edge profiles available on request). Please ensure your measurements are in mm (1m = 1000mm).
Total length = mm
Cost = £0
|
 |
Polished cut-outs
Polished cut-outs are the cutouts for under-mounted sinks etc. that have the inner edges exposed and to be polished.
Quanity =
Cost = £0
|
 |
Double polished cut-outs
Double polished cut-outs are cut-outs for two undermounted sinks next to each other that have the inner edges exposed and polished.
Quanity =
Cost = £0
|
 |
Unpolished cut-outs
Unpolished cut-outs are the cut-outs with an inner edge that will not be visible such hobs and surface mounted sinks etc.
Quanity =
Cost = £0
|
 |
Tap Holes
These are the cut-outs for taps and switch holes, i.e. waste disposal.
Quanity =
Cost = £0
|
 |
Drainer Grooves (1 Set = 5 Grooves)
Drainer grooves are five straight grooves (1 set) in the worktop next to the sink which act as a draining board.
Quanity =
Cost = £0
|
 |
Recessed Drainer
The granite is milled out and re-polished to create a drainage area running into the sink. 1 set of drainer grooves is included.
Quanity =
Cost = £0
|
 |
Upstands
Upstands can be used instead of tiling the walls. Please measure the total length of upstands required. Price is based on 100mm high 20mm thickness granite. Please ensure your measurements are in mm (1m = 1000mm)
Total length = mm
Cost = £0
|
 |
Splashback pieces
This is the granite panel which can be used behind the hob, range and sink to protect the wall from splashes. You can also have full height splashbacks which are positioned on top of the granite work surface to the underside of the wall units.
Measure the length and width in mm of each splashback piece that you require and enter them into the boxes. Price is based on 20mm thickness granite. Please ensure your measurements are in mm (1m = 1000mm).
Piece 1 = mm x mm
Piece 2 = mm x mm
Piece 3 = mm x mm
Piece 4 = mm x mm
Piece 5 = mm x mm
Piece 6 = mm x mm
Piece 7 = mm x mm
Piece 8 = mm x mm
Total Area = 0 m2
Cost = £0
|
|
Current Sink Selection:
To view our range of sinks and select the one you want from our gallery please click on the tile opposite.
Price: £
|
|
Current Tap Selection:
To view our range of taps and select the one you want from our gallery please click on the tile opposite.
Price: £
|
| |
Totals
Materials = £0
Fabrication = £0
Templating & Fitting = £0
Sinks & Taps = £0
Total Quotation = £0
Total including VAT (20%) = £0
Special offer if fitted in January or February. Free templating worth £0
New price including Vat = £0
This price is a guide only, there may be extra charges for shaping, special cuts and/or additional mileage costs for traveling further than one hours drive from our factory PO15 6QS. There may also be a reduction in the templating, fabrication and fitting charge for very small jobs such as islands, vanity tops etc. For a more accurate quote please submit the form below with a kitchen plan attached.
|
Price PromiseWe believe that we offer the best value for money for the high quality granite and quartz worktops and services we offer in the South of England. If in the unlikely event you get a more competitive genuine like-for-like, fully itemised quote that is for the same premium grade granite or quartz, the same high quality fabrication process, cut from full sized scants (not blanks), is fabricated within a 75 mile radius of us and can be fitted within 5 working days of templating then please forward us a copy and we will endeavour to beat it. |
Would you like to discuss this price estimate further?
For further information please complete below and submit the form. |
| Name* |
|
| Address* |
|
| Post Code* |
|
| Phone number* |
|
| Email address* |
|
| Comments / Questions |
|
| Upload plan |
|
| How soon do you want the worktops fitted?* |
|
| How did you hear about us?* |
|
| |
